5D

5D S E R I E S R E C E I V E R S I G H T S

CODE NO.

MODEL NO.

PRICE

1382

5D-12/37

For Winchester 1200, 1400, 12-25, 150, 190, 250, 255, 270, 275, and 290; Remington 1100, '58, 11-48, Sportsman 48, 870 and 31; Stevens 620; Ithaca 37, and other shotguns with flat-sided receivers.

$38.95

1384

5D-12/37 with Shotgun Aperture(3/8X.093)

For Winchester 1200, 1400, 12-25, 150, 190, 250, 255, 270, 275, and 290; Remington 1100, '58, 11-48, Sportsman 48, 870 and 31; Stevens 620; Ithaca 37, and other shotguns with flat-sided receivers. (With Shotgun Aperture)

$38.95

1385

5D-22/410

For the .22-410, 20, etc. over and under Savage or Stevens.

$38.95

1387

5D-22/410 with Shotgun Aperture(3/8X.093)

For the .22-410, 20, etc. over and under Savage or Stevens. (With Shotgun Aperture)

$38.95

1388

5D-39A

For Marlin 39A lever action. No drilling or tapping necessary.

$38.95

1394

5D-70

For Winchester 70, 54, 670, 770, and 74 .22 auto; Remington 700, 721, 722 and 725; Mossberg 800 and 3000; and Howa Model 1500

$38.95

1396

5D-81

For Marlin 80, 81 and A1 rifles (factory drilled and tapped)

$38.95

1398

5D-94/36

For Winchester 94 Top Eject, 64, 9422; Marlin 36, 336, 1894, .44 Magnum (Pre-2001)

$38.95

36888

5D-94SE

For Winchester 94 Angle Eject (except Big Bore model). Fits factory drilling and tapping on top of receiver.

$38.95

70224

5D-336

For Marlin centerfire lever actions. Uses two rear scope mount holes. The 1894 requires hammer extension.

$38.95

1400

5D-510

For Remington 510, 511, 512, 513 and 521T (some factory drilled and tapped), Nylon 12 tubular loading, Nylon 11 box magazine.

$38.95

1406

5D-760N-740-742

For Remington 760 with serial numbers above 154,965 and 740's above serial number 64,046. Also for Remington Nylon 66 and Models Four, Six, 7400 and 7600; Winchester new series 250, 255, 270, 275 and 290 with ramp; and Savage 170 and Remington 572, 572BDL, 552BDL .22 slide action; Kodiak 260.

$38.95

70809

5D-AG

For Airguns and .22 Rifles with dovetail grooved receivers and high line of sights(no drilling or tapping required)

$38.95

70810

5D-GR

For Airguns and .22 Rifles with dovetail grooved receivers and low line of sights(no drilling and tapping required)

$38.95

1410

5D-JEMS

For Jap, Enfield, Mauser and Springfield 03; Remington 700 L.H.; Daisy 99 and 299.

$38.95

1412

5D-KRAG

For American Krag.

$38.95

1414

5D-03/A3

For 1903-A3 Springfield

$38.95

1416

5D-RU

For 44 Ruger Carbine and 10/22 (all models) including 10-22 Magnum

$38.95

1418

5D-SH

For Sheridan Model C; Benjamin 340, 342, 347. (The Benjamin needs a higher front sight.)

$38.95

1420

5D-SMLE

For British Short Magazine Lee Enfield, Nos. 1, 4, & 5.

$38.95

1422

5D-SSM

For square stern models of Remington, Browning and Savage auto shotguns. Also fits Remington 8-81 autoloaders.

$38.95

1424

5D-SSM with Shotgun Aperture

For square stern models of Remington, Browning and Savage auto shotguns. Also fits Remington 8-81 autoloaders. (With Shotgun Aperture)

$38.95