|
CNC machined steel beads (not plastic) |
FireSight STEEL RIFLE BEADS:
Steel front dovetail sight beads machined to accept Fire Sight light
gathering rod. A must for all shooters in low-light situations. Comes in a
variety of heights.
S
T E E L R I F L E B E A D S |
| #56432 |
250N |
$18.95 |
|
| #56433 |
290N |
$18.95 |
|
| #56434 |
312N |
$18.95 |
|
| #56435 |
343N |
$18.95 |
|
| #56436 |
375N |
$18.95 |
|
| #56437 |
406N |
$18.95 |
|
| #56438 |
450N |
$18.95 |
|
| #56439 |
250M |
$18.95 |
|
| #56440 |
290M |
$18.95 |
|
| #56441 |
312M |
$18.95 |
|
| #56442 |
343M |
$18.95 |
|
| #56443 |
375M |
$18.95 |
|
| #56444 |
406M |
$18.95 |
|
| #56445 |
450M |
$18.95 |
|
| #59079 |
.450W |
$18.95 |
|
| #59080 |
.500W |
$18.95 |
|
| #59081 |
.538W |
$18.95 |
|
| #59082 |
.570W |
$18.95 |
|
| #59083 |
.375W |
$18.95 |
|
| #59084 |
.410W |
$18.95 |
|
| #60237 |
538M |
$18.95 |
|
| #60238 |
570M |
$18.95 |
|
Note: Installation of dovetailed front sights in ramps and especially
dovetailed barrels almost always requires some minor fitting. Gunsmith installation
is recommended.
(N) .250 narrow width is for Williams Streamlined and Shorty ramps.
(M) .340 medium width is for factory ramps such as Marlin, Remington etc.
(W) .531 wide width is for dovetailed barrels commonly found on .22 rifles and
muzzleloaders.
.22 or MUZZLELOADER FRONT FireSight BEAD:
Wide Bead |
This wide steel
front bead has been machined to accept a FireSights fiberoptic
light gathering rod. A must for all muzzleloader and .22 shooters, especially in
low light situations. Fits all standard 3/8 inch dovetails in a variety of heights. |
.22 or Muzzleloader Fire Sight Front
Bead - $18.95 |
| Item #59079 |
.450W |
|
| Item #59080 |
.500W |
|
| Item #59081 |
.538W |
|
| Item #59082 |
.570W |
|
| Item #59083 |
.375W |
|
| Item #59084 |
.410W |
|
(W) .531 wide width is for dovetailed barrels commonly found on
muzzleloaders.
Note: Installation of dovetailed front sights in ramps and especially dovetailed
barrels almost always requires some minor fitting. Gunsmith installation is
recommended.
SKS RIFLE FireSight BEAD:
 |
No gunsmithing required for this fiber optic, light gathering metallic front SKS sight. Simply
remove the existing front sight post, and install the new Fire Sight front sight.
CLICK HERE for an independent product review from surplusrifle.com.
SKS FireSight Bead $19.95
Item #60214
|
SKS Rifle FireSight Set
Combines the Fire Sight front bead with Williams fully adjustable metallic rear sight for
an incredible sight picture. No gunsmithing required.
CLICK HERE for an independent product review from surplusrifle.com.
click here to view a picture
SKS FireSight Set $39.95
Item #63464
 |
NEW! Ramp Hood
Ramp Hood $10.50
Item #70031
|
|
