Williams Gun Sight Company, Inc. has offered quality gunsmithing services
to Michigan hunters and shooters for over 60 years. Now, Williams is
pleased to offer our famous gunsmithing services to our World Wide Web
customers.
Williams gunsmithing department has added many new services
with the help of our talented gunsmithing staff.
Barrel installation is available
with any available caliber, and by using the highest quality barrels
like Hart, Shilen and Pac-Nor, we have been able to obtain proven
extreme accuracy.
We offer Williams Guide Series and Weatherby muzzle brakes.
We feel these brakes are the finest visually and the most effective
brakes on the market.
Complete engraving services are available.
Quality rebluing services have
always been a mainstay and Williams continues to offer new finishes like
a bead blast fine matt finish and rust bluing process for double
shotguns.
Custom stocks by Williams service
supervisor, Kevin Wigton, are slow, time consuming work, but worth the
wait.
Williams also offers drop in stock installations
from HS Precision, McMillan, Bell and Carlson, Butler Creek and MPI.
These stocks can be finished in less time than a total custom gun.
Williams Service Department is a warranty repair center
for Browning, Remington, U.S. Repeating Arms Company, Inc. and Weatherby.
NOTE: When disassembly is required, all guns will be test fired at a labor
rate of $5.00 per gun plus ammo used.
Williams hopes the gunsmithing services and
products
mentioned throughout our web site
provide you with many years of fine shooting.
Should you have any questions
call our gunsmiths directly at:
1-800-530-9028
between 9am and 6pm E.S.T.Monday-Saturday
10-5 Sunday
METAL WORK
| |
REBLUING |
| Parkerizing
Black or Gray |
DuraCoat and Gun Kote |
Sand
Blast |
Satin
Bead Blast |
Polished
4-500 Gloss |
Mirror
Weatherby
Finish |
| Single Barrel Shotgun |
$150.00 |
$150.00 |
$150.00 |
$155.00 |
$165.00 |
N/A |
| Bolt Action rifles |
$200.00 |
$225.00 |
$150.00 |
$190.00 |
$200.00 |
$265.00 |
| Pump or Auto Shotgun and Rifles |
$200.00 |
$225.00 |
$150.00 |
$200.00 |
$200.00 |
$275.00 |
| Pump or Auto Shotgun without ribs |
$200.00 |
$225.00 |
$155.00 |
$170.00 |
$180.00 |
$240.00 |
| 1911 Style Pistols |
$200.00 |
$225.00 |
$140.00 |
$170.00 |
$180.00 |
$280.00 |
| A-5 Style Shotguns & Model 12 Win. |
$225.00 |
$240.00 |
$175.00 |
$250.00 |
$275.00 |
P.O.R. |
| Hard Soldered O&U Shotguns and Double Barrels |
$225.00 |
$225.00 |
$165.00 |
$250.00 |
$300.00 |
N/A |
| Lever Action Rifles |
$225.00 |
$240.00 |
$160.00 |
$220.00 |
$240.00 |
P.O.R |
| Barrels Only (No Rib) |
$125.00 |
$125.00 |
$100.00 |
$125.00 |
$125.00 |
$155.00 |
| Barrels Only (With Rib) |
$125.00 |
$125.00 |
$100.00 |
$125.00 |
$155.00 |
$200.00 |
| Muzzleloaders (Dip Only -- $55.00) |
|
$150.00 |
$125.00 |
$215.00 |
$255.00 |
N/A |
| Revolvers |
$200.00 |
$225.00 |
$150.00 |
$200.00 |
$225.00 |
P.O.R |
| Remington Models: 8,81,10,24,141,14,31 |
|
$275.00 |
$195.00 |
$250.00 |
$300.00 |
N/A |
| Winchester Models: 03,06,71,86,92,95,97,07,10,63,88 |
|
$275.00 |
$195.00 |
$300.00 |
$300.00 |
N/A |
- Prices subject to change without notice -
| Cyanide Case Color Receivers |
$250.00 |
Bone and Charcoal Case Color Receivers:
Small - Colt SA, Stevens Favorite, etc.
Large - Winchester High & Low Wall; Doubles, etc.
|
250.00
300.00 |
| Bone and Charcoal Case Color Win. 73, 76, 86 |
350.00 |
Color Case Butt Plate, Hammers & Trigger Guards
(If More Than One) |
100.00 ea.
60.00 ea. |
| Rust Blue Most Double Barrels |
350.00 |
| All Octagon Barreled Guns Will Be Extra |
P.O.R |
| Engraved Guns Will Be More |
P.O.R |
| Highly Rusted or Pitted Guns Will Be More |
P.O.R |
| Restorations on Antique Guns |
P.O.R |
| Hard Chrome, Teflon and Other Finishes Are Available |
P.O.R |
| Bolt Alteration (Bolt Handle Extra) |
110.00 |
| Damascene Bolt and Follower |
110.00 |
| Checker Bolt Handle |
(per panel) 100.00 |
| Milling Lightening Cuts in Rifle Action |
P.O.R. |
| Install Douglas or Shilen FTC Barrel (Bbl. Extra) |
100.00 to 150.00 |
| Install Barrel From Blank |
Min. 325.00 |
| Reline .22 Barrel |
150.00 |
| Cut Extractor Slot on Barrel Installation |
55.00 |
| GunKote Trigger Guards |
25.00 |
| Hard Enamel Trigger Guards |
50.00 |
- Prices subject to change without notice -
[Top of page]
RIFLE
ACCURIZING
| Accuracy check includes testing scope and testing rifle in a free
floated stock if neccessary. |
35.00 to 75.00 |
Lap locking lugs
May need re-headspacing after lapping lugs
|
$75.00 P.O.R. |
| Install Sako extractors |
90.00-190.00 |
| True front of receiver |
75.00 |
| True bolt face |
75.00 |
| Lap barrel |
85.00 |
| Adjust rifle trigger when honeing is needed Mod 70 Win, Ruger 77
MKII all lever Rifles |
Min. 75.00 |
| Adjust adjustable rifle trigger |
55.00-65.00 |
| Install Pre-threaded barrel |
100.00-150.00 |
| Custom Barrel Installation |
325.00 |
| Blueprint Action |
235.00 |
| Cryo-Accurizing |
80.00 |
| Custom chambering |
P.O.R. |
| Glass bed action |
125.00 |
| Glass bed lug only |
85.00 |
| Free float barrel |
70.00 |
| Pillar bed rifle (includes free float barrel) |
225.00 |
| Trigger Job on 870-1100-742-7400 |
60.00 |
| Lap Scope Rings |
50.00 |
| Deweight Rifle Action |
350.00-450.00 |
| Hawkeye Bore Inspection |
25.00 |
| Burn DVD of Rifle Bore |
35.00 |
| Shotgun "SLUG" accurizing available |
P.O.R. |
- Prices subject to change without notice -
[Top of page]
STOCK WORK
STOCK FINISHES:
Satin Oil Finish
Deluxe Satin Oil finish (Pores will be completely filled)
Weatherby Finish (High Shine)
Satin Varathane
Removing High Shine for Oil Finish
Add $35.00
NOTE: Deduct $10.00 for small wood
stocks such as Stevens Crackshot. |
$185.00
215.00
275.00-325.00
115.00
|
| Guns with Fancy Checkering |
P.O.R. |
| Guns with Bad Dings, Cracks or Grease Deterioration |
P.O.R. |
| Install Skeleton Grip cap or Butt plate |
P.O.R. |
| Reduce wight or skeletonize stock |
P.O.R. |
| Recheckering |
P.O.R. |
Complete Checkering and Custom Stocks Available
Wood and Glass
|
P.O.R. |
Also Available: Complete Stock Restorations,
Replacement to Original Size and Specs or Special Dimensions |
P.O.R. |
| Inlet Bolt Handle into Stock and Receiver |
45.00 |
| Mortising of Stock when Installing Receiver Sight |
40.00 |
| Install Recoil Pad (Pad Additional) |
45.00 |
| Cut Stock and Install Recoil Pad (Plus Pad) |
50.00 |
Add Spacers and Install Recoil Pad (Pad Extra)
Extra, for cut
Synthetic Stocks
|
70.00
5.00add 15.00 |
| Install McMillan or other Composite Stocks |
P.O.R. |
- Prices subject to change without notice -
[Top of page]
PISTOLSMITHING
| Standard Trigger Job |
Min. $85.00-100 |
| Target Trigger Job |
Min. 150.00 |
| Install Thumb or Grip Safety |
Min. 60.00 |
| Revolver Barel Installation |
P.O.R. |
| Install Wilson Style Grip Safety |
110-140.00 |
| Checker Front Strap |
220.00 |
| Checker Rear Strap |
200.00 |
| Custom Sights and Other custom Parts Installations Available |
P.O.R. |
| Install Comp on Barrel |
P.O.R. |
| Custom Flame or Dazzle Camo Pattern |
P.O.R. |
| Complete SA Trigger & Action Job |
120-150.00 |
| Retime Revolver (plus parts) |
50-110.00 |
- Prices subject to change without notice -
[Top of page]
Shorten and crown barrels of Rem. 760, 740;
Savage 99; Win. 100 and 88
(or any rifle barrel under 18") |
$150.00 |
| Shorten and crown rifle barrels other than above |
65.00 |
| Cut and crown shotguns and re-install bead |
65.00 |
| Cut, crown and install bead on double barrel |
75.00 |
| Chamber cast |
50.00 |
| Bore shotgun with chrome barrel |
75.00 |
| Sight in Rifle or Shotgun |
30.00 plus ammo |
| Remove barrel bands and open sights from military rifles |
ea. 30.00 |
Chambering 12,20 and 410 gauge shotguns to 3"
(Per Barrel) |
85.00 |
Rechamber short chambered barrels to modern 2-3/4"
forcing cone (Per Barrel) |
85.00 |
Converting 2-9/16" Browning Auto to 2-3/4"
(if necessary to replace cracked forend, additional) |
200.00 |
Converting 2-9/16" Winchester Model 12
(16 & 20 ga.) to 2-3/4" |
200.00 |
- Prices subject to change without notice -
[Top of page]
INSTALLATIONS
| Install "Screw-On" types of ramps w/ drill &
tapping |
$40.00 |
| Drilling and tapping Savage 99 for FP receiver sight |
40.00 |
| Drilling and tapping for most 5D and FP receiver sights |
40.00 |
| WGRS top mounted (when not drilled and tapped) |
40.00 |
| Installation of receiver sights when not necessary to drill and tap |
20.00 |
| Install open sight base and WGOS |
35.00 |
| Install Tru-Choke 12 and 20 ga. (Tubes Extra) |
95.00 |
| Install Tru-Choke 10 ga. (Tubes Extra) |
150.00 |
| Install 3 position safeties on Mausers, Remington, etc. |
P.O.R. |
| Express Sights + Impact Adjustment |
P.O.R. |
| Install mounts when drilling and tapping is required |
80.00 |
| Express Sight installation per sight (refinishing extra) |
85.00 |
| Drill and tap hardened receivers: Ruger Mini-14, Stainless and 77;
Savage 99;
Enfields; Springfields
where carbide drills are required |
95.00 |
| Install pistol mounts |
80.00 |
| Install side mount on 30 Carbine, M1 Garand and M1A |
95.00 |
| Install leather recoil pad (Pad Extra) |
165.00 |
| Install Buehler Safety |
Min. 40.00 |
| Change safety on 870-1100 from right to left |
50.00 |
| Install Timney Trigger or other brands-add 40.00 when
trigger guard milling is required. |
55.00 to 85.00 |
| Bore Sight gun |
7.50 |
Install Williams Guide Series Muzzle Brake
(see details below) |
199.00 |
| Install Mounts when Drilling & Tapping is required |
110.00 |
| Install Scope on Pre-Drilled Rifle |
25.00 |
| Install Scope While-You-Wait |
30.00 |
| ************Scope Mounting Includes Bore
Sighting*********** |
|
| Sight-In Rifle While-You-Wait (Ammunition
Additional) |
35.00
|
| Install Weatherby Muzzle Brake |
160.00 |
| Install Mid or Front Bead when Drilling and Tapping is
needed |
25.00 |
| Install Mid or Front Bead if Drill and Tap is Needed
(While-You-Wait) |
35.00 |
| Install Sling Swivels in Shotgun
w/ End Cap Already Drilled
If Done While-You-Wait(WYW) |
25.00
35.00 |
| Install Sling Swivels in Bolt Rifle |
35.0 |
| Install Sling in Bolt Rifle (While-You-Wait) |
40.00 |
| Install Sling Swivels in Remington Semi-Autos &
Pumps & All Lever Rifles
If Done While-You-Wait |
30.00
40.00 |
| Headspace Check
If Done While-You-Wait (WYW)
|
20.00
25.00 |
| Function & Headspace Check(Includes Test Fire)
Ammo Extra(WYW) |
35.00 |
| Chamber Cast Plus Caliber Designation Check |
45-70.00 |
| Express Sight Installation Solder on Frt & Rear
(no bluing) [$75 per sight] |
200.00 |
| Solid Express Sight Impact Adjustment (Ammo
Additional)[per sight leaf] |
P.O.R. |
| Front or Rear Rifle Sight, Dovetail Style,
Installation per each |
20.00 |
| Front or Rear Rifle Sight, Dovetail Style,
Installation per each (WYW) |
25.00 |
| WGRS Style When Measurements are required Ea. |
25.00 |
| WGRS Style When Measurements are required Ea. (WYW) |
30.00 |
| Install Remington Fire Sight Set
If Done While You Wait |
25.00
30.00 |
| Install Slugger Sights
If Done While You Wait |
30.00
35.00 |
- Prices subject to change without notice -
WILLIAMS GUIDE SERIES BRAKE
"You Can Expect" the following results:
| CALIBERS |
Total
Rifle
Weight |
Energy
in foot
pounds |
Factory
Bullet
Weight |
Recoil
reduced to |
Energy
in foot
pounds |
| 460 Wby. |
11.5 |
98 |
500 |
375 H&H |
36 |
| 416 Rem. |
10.25 |
56 |
400 |
338 Win. |
24 |
| 375 H&H |
10.5 |
43 |
300 |
30/06 |
16 |
| 338 Win. |
9 |
38 |
250 |
270 Win. |
13 |
| 300 Win. |
8.5 |
31 |
200 |
243 Win. |
12 |
| 7 mm R |
8.5 |
26 |
175 |
243 Win. |
9 |
| 30/06 |
8 |
24 |
200 |
243 Win. |
7 |
| 270 Win. |
8 |
17 |
150 |
223 Rem. |
6 |
|
The Guide Series Brake is ...
- Extremely efficient.
- No loss in accuracy.
- Virtually eliminates muzzle jump and reduces recoil substantially.
Guide Series Brake Installed.....$199.00.
|
ADDITIONAL WILLIAMS SERVICE DEPARTMENT
PRICES |
|
|
|
****Free Range Pass With All Labor $17.50 or Over**** |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PISTOLSMITHING |
|
|
|
|
W-U-W |
|
|
|
Install Pistol Sight (Dovetail Style) |
|
|
(FRONT) |
$25.00 |
- |
$ 35.00 |
|
|
|
|
|
|
|
(REAR) |
$25.00 |
- |
$ 35.00 |
|
|
|
Solder on Front |
|
|
|
|
|
|
$ 75.00 |
|
|
|
Stake on Front |
|
|
|
|
|
|
$ 45.00 |
|
|
|
Mill in Low Profile Rear |
|
|
|
|
$95.00 |
- |
$ 125.00 |
|
|
|
While-You-Wait on Dovetail Pistol Sights |
|
|
|
|
$ 10.00 |
|
|
|
|
|
|
|
|
|
|
+$10. per pair |
|
|
|
Revolver and Pistol Trigger Job |
|
|
|
|
|
$85-100.00 |
|
|
|
|
|
|
|
|
|
|
+ parts |
|
|
|
Drill and Tap and Install Scope and Mounts |
|
|
|
|
$ 80.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INSTALLATIONS & OTHER ADDITIONS |
|
|
|
Drill and Tap on Rem. 870, Mossberg 500 and Ithaca 37 with no
Scope Mounting |
|
|
|
$ 70.00 |
|
|
|
Drill and Tap on Rem. 870, Mossberg 500 and Ithaca 37 with Scope
Mounting |
|
|
|
$ 80.00 |
|
|
|
Drill and Tap on Rem. 870, Mossberg 500 and Ithaca 37 with Scope
Mounting |
[While-U-Wait] |
OR ASAP |
$ 100.00 |
|
|
|
Drill & Tap on Rem. 870, Moss. 500 & Ithaca 37 w/no Scope
Mounting |
[While-U-Wait] |
OR ASAP |
$ 90.00 |
|
|
|
Drill and Tap on Rem. 1100 or 11/87 Top Mount with no Scope
Mounting |
|
|
|
$ 80.00 |
|
|
|
Drill and Tap on Rem. 1100 or 11/87 Top Mt. with no Scope
Mounting |
[While-U-Wait] |
OR ASAP |
$ 100.00 |
|
|
|
Drill and Tap on Rem. 1100 or 11/87 Top Mount with Mounting
Scope |
|
|
|
$ 90.00 |
|
|
|
Drill and Tap on Rem. 1100 or 11/87 Top Mt. with Mounting Scope |
|
[While-U-Wait] |
OR ASAP |
$ 110.00 |
|
|
|
Install Scope on Pre-Drilled Rifle |
|
|
|
|
|
$ 25.00 |
|
|
|
Install Scope |
|
|
|
[While-U-Wait] |
|
|
$ 35.00 |
|
|
|
Install Buehler, Conetrol or Warne Rings and Bases |
|
|
|
|
$ 55.00 |
|
|
|
Install Talbot Mounts |
|
|
|
|
|
|
$ 75.00 |
|
|
|
*** Scope Mounting Includes Bore Sighting*** |
|
|
|
|
|
|
|
|
Bore Sight Only |
|
|
|
|
|
|
$ 7.50 |
|
|
|
Sight-In Rifle |
|
|
Ammo Additional |
|
|
|
$ 30.00 |
|
|
|
Sight-In Rifle While-You-Wait |
|
|
Ammo Additional |
[While-U-Wait] |
|
|
$ 35.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Install Mid or Front Bead when Drilling and Tapping is needed. |
|
|
|
|
$ 25.00 |
|
|
|
Install Mid or Front Bead if Drill and Tap is Needed |
|
[While-U-Wait] |
|
|
$ 40.00 |
|
|
|
Install Sling Swivels in Shotgun with End Cap Already Drilled |
|
|
|
|
$ 25.00 |
|
|
|
Install Sling Swivels in Shotgun with End Cap Already Drilled |
|
[While-U-Wait] |
|
|
$ 40.00 |
|
|
|
Install Sling Swivels in Bolt Rifle |
|
|
|
|
|
$ 35.00 |
|
|
|
Install Sling Swivels in Bolt Rifle |
|
|
[While-U-Wait] |
|
|
$ 45.00 |
|
|
|
Install Sling Swivels in Remington Semi-Autos and Pumps and in
all Lever Rifles |
|
|
|
$ 30.00 |
|
|
|
Install Sling Swivels in Rem. Semi-Autos and Pumps and in all
Lever Rifles |
[While-U-Wait] |
|
|
$ 45.00 |
|
|
|
Headspace Check |
|
|
|
|
|
|
$ 20.00 |
|
|
|
Headspace Check |
|
|
|
[While-U-Wait] |
|
|
$ 30.00 |
|
|
|
Function and Headspace Check (Includes Test Fire) |
Ammo Additional |
[While-U-Wait] |
|
|
$ 45.00 |
|
|
|
Chamber Cast Plus Caliber Designation Check |
|
|
$45.00 |
- |
$ 70.00 |
|
|
|
Express Sight Installation Solder on Front and Rear. (Bluing
Not Included) [$100 Per Sight] |
|
|
$ 200.00 |
|
|
|
Solid Express Sight Impact Adjustment [Per Sight Leaf] |
Ammo Additional |
|
|
|
P.O.R |
|
|
|
Front or Rear Rifle Sight, Dovetail Style, Installation……. Ea. |
|
|
|
|
$ 25.00 |
|
|
|
Front or Rear Rifle Sight, Dovetail Style, Installation……. Ea. |
|
[While-U-Wait] |
|
|
$ 30.00 |
|
|
|
Additional $15.00 when test firing required |
Ammo Additional |
|
|
|
|
|
|
|
WGRS Style When Measurements are Required …. Ea. |
|
|
|
|
$ 25.00 |
|
|
|
WGRS Style When Measurements are Required….. Ea. |
|
[While-U-Wait] |
|
|
$ 30.00 |
|
|
|
Install Remington Fire Sight Set |
|
|
|
|
|
$ 25.00 |
|
|
|
Install Remington Fire Sight Set |
|
|
[While-U-Wait] |
|
|
$ 30.00 |
|
|
|
Install Slugger Sights |
|
|
|
|
|
|
$ 30.00 |
|
|
|
Install Slugger Sights |
|
|
|
[While-U-Wait] |
|
|
$ 35.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MINIMUM LABOR FOR GUNS IS ------- $17.50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note All |
|
|
|
|
|
|
|
|
|
|
|
|
|
C&O will require |
|
|
|
|
|
|
|
|
|
|
|
|
Test fire charge |
$ 7.00 |
|
|
|
|
|
|
|
CLEAN AND OIL |
|
|
|
|
|
|
|
Bolt Action Rifles |
|
|
|
|
$ 65.00 |
- |
$ 95.00 |
|
|
|
|
|
|
|
Lever Action Rifles |
|
|
|
|
$ 85.00 |
- |
$120.00 |
|
|
|
|
|
|
|
Military Semi-Auto Rifles |
|
|
|
|
$ 80.00 |
- |
$120.00 |
|
|
|
|
|
|
|
Muzzleloading Rifles |
|
|
|
|
$ 85.00 |
- |
$120.00 |
|
|
|
|
|
|
|
Remington Semi & Pump Action Rifles |
|
|
|
$ 75.00 |
- |
$100.00 |
|
|
|
|
|
|
|
Single Shot Rifles |
|
|
|
|
$ 60.00 |
- |
$ 75.00 |
|
|
|
|
|
|
|
Auto-5 Browning Shotguns and Like Patents |
|
|
|
$ 95.00 |
- |
$150.00 |
|
|
|
|
|
|
|
Double and Over & Under Shotguns |
|
|
|
$ 95.00 |
- |
$150.00 |
|
|
|
|
|
|
|
Remington Shotguns and Like Patents |
|
|
|
$ 75.00 |
- |
$100.00 |
|
|
|
|
|
|
|
Single Barrel and Bolt Action Shotguns |
|
|
|
$ 75.00 |
- |
$ 90.00 |
|
|
|
|
|
|
|
Pistols |
|
|
|
|
$ 70.00 |
- |
$ 90.00 |
|
|
|
|
|
|
|
Revolvers |
|
|
|
|
$ 75.00 |
- |
$ 90.00 |
|
|
|
|
|
|
|
8, 81, 10, 29, 141, 31, 66, 14 Rem., 88, 03, 06, 71, 86, 92,
1897, 07, 10, 63, |
|
|
|
|
|
|
|
|
|
|
|
|
95 Winchester and Marlin Pump Shotguns |
|
$145.00 |
- |
$170.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Keep these charges in mind when completing estimates: |
|
|
|
|
|
|
|
|
|
|
|
|
Extra Dirt or Rust |
|
|
|
|
$ 20.00 |
- |
$ 35.00 |
|
|
|
|
|
|
|
Remove Heavy Copper Fouling from Rifle Bore |
|
(Additional) |
|
$ 20.00 |
- |
$ 45.00 |
|
|
|
|
|
|
|
Remove Lead from Revolver Cylinder & Forcing Cone |
(Additional) |
|
$ 30.00 |
- |
$ 40.00 |
|
|
|
|
|
|
|
Polish Wood with Wax |
|
|
|
|
|
|
$ 25.00 |
|
|
|
|
|
|
|
Inspect Bore with Bore Scope |
|
|
|
|
|
|
$ 20.00 |
|
|
|
|
|
|
|
Burn DVD of Your Barrels Bore |
|
|
|
|
|
$ 30.00 |
|
|
|
|
|
|
|
MUZZLE LOADERS |
|
|
|
|
|
|
|
Remove Stuck Breech Plug, In-Line and Traditional |
|
|
$ 60.00 |
- |
$110.00 |
|
|
|
|
|
|
|
Remove Stuck Breech Plug, In-Line and Traditional |
[While-You-Wait] |
Add |
$ 15.00 |
|
|
|
|
|
|
|
|
|
Remove Stuck Ball |
Without Plug Removal |
|
|
$ 25.00 |
- |
$ 55.00 |
|
|
|
|
|
|
|
Remove Stuck Ball |
Without Plug Removal |
[While-You-Wait] |
Add |
$ 15.00 |
|
|
|
|
|
|
|
|
|
Sight-In Inline Only……….(Plus Supplies) |
Includes Cleaning |
|
|
|
$ 70.00 |
|
|
|
|
|
|
|
Sight-In Inline Only……….(Plus Supplies) |
|
[While-You-Wait] |
OR |
ASAP |
|
$ 85.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COWBOY GUNS |
|
|
|
|
|
|
|
Complete Action and Trigger Jobs on Colt and Ruger S.A. (Parts
Extra) |
|
$135.00 |
- |
$165.00 |
|
|
|
|
|
|
|
Lever Action Trigger and Action Jobs |
|
|
|
$115.00 |
- |
$150.00 |
|
|
|
|
|
|
|
Single Action Grip Fitting |
|
|
|
|
R.O.R |
|
|
|
|
|
|
|
Retiming (Parts Extra) |
|
|
|
|
$ 85.00 |
- |
$130.00 |
|
|
|
|
|
|
|
Install Free Spin Pawl on Rugers (Parts Extra) |
|
|
|
$ 75.00 |
- |
$ 85.00 |
|
|
|
|
|
|
|
Point of Impact Adjustments on S.A. |
|
|
|
R.O.R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NICKEL, HARD CHROME AND GOLD PLATING – (Shipping Included) |
|
|
|
|
|
|
|
|
|
|
Rifles and Shotguns |
|
|
|
|
|
|
|
|
|
|
|
Nickel & Hard Chrome |
|
Pistols |
(Except Shotguns & Military Rifles) |
|
|
|
ADD $50.00 |
|
|
|
|
|
|
Satin Finish (Brush) |
|
$255.00 |
$295.00 |
|
|
|
FOR |
|
|
|
|
|
|
|
Matte Finish (Glass Bead) |
|
$255.00 |
$295.00 |
|
|
|
ALUMINUM |
|
|
|
|
|
|
Bright |
|
$295.00 |
$330.00 |
|
|
|
RIFLES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gold Plate-24K Gold |
|
|
|
|
|
|
|
|
|
|
|
$575.00 |
$700.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nickel or Hard Chrome |
|
|
|
|
|
|
|
|
|
Slide only |
|
$140.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Frame Only |
|
$200.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Magazines |
|
$40.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[Top of page]
SHIPPING YOUR FIREARM
TO OUR SERVICE DEPARTMENT
It is legal, under Federal law, to ship a personal firearm to a licensed dealer such as
Williams Gun Sight for repair purposes without obtaining licensing. However, the
repaired firearm must be returned to the same address from which it was received.
You should check with the shipping service, such as UPS,
that you intend to use, as their policies vary in regard to shipping
firearms. Shotguns and rifles may be shipped by the US Postal Service, per
the Domestic Mail Manual(Sec.11.3).
Clearly label the box containing your firearm with our name and address as
follows:
Williams Gun Sight Company, Inc.
7389 Lapeer Road
Davison, MI 48423
Be sure to use adequate packaging materials when shipping your firearm.
Make sure the firearm is unloaded and do not ship any live ammunition
with the firearm.
Please enclose a letter detailing what you would like done to the
firearm and a phone number to contact you.
[Top of page] |
Home